|
Employer-Paid Global Staffing Since 1979 |
Advertisers |
|
|
Saudi
Arabia Opportunities with Aramco Chemical, Refinery Planning ,
Inspection, Mechanical, Electrical, Civil, Cost, Planning & Scheduling, Estimating, and many other positions
in Central Engineering with the world’s largest Oil & gas company. Typical
Base to approx. US$140K + overseas package, tax protected savings & super
retirement programs. Family status, career jobs. Mandatory Retirement
Age is 60. Looking for direct employees and not contractors or temporary/job
shop backgrounds. Please
reference the job Number or send a copy of the job description when applying
and highlight how your experience qualifies you for the position. Click Here to Apply Scroll to view all openings With
their massive capital downstream budget moving right along, Aramco is interviewing
for the following positions! Process Automation
Facilities Planning Engineer E07-70008227 Pipelines
Facilities Planning Specialist - E07-70017420B Petrochemical Facilities Specialist - E07-70011688 Gas Processing Engineers G17-70017348A Electrical System Facilities Planning Specialist DISTRIBUTION & TERMINALS FACILITIES PLANNING
SPECIALIST Chemical Engineers O03-70010794I,
O03-70010794G Process Automation
Facilities Planning Engineer E07-70008227 $100000 - 160000 World's
largest (reserves) oil company (Dhahran, Saudi Arabia) - above is only the
base salary - ($100/160K) - in addition there are uplifts, COL allowances,
etc., etc. and the world’s best savings/retirement program. Process
Automation Facilities Planning Engineer E07-70008227 E07-70017419A Position
Description: We seek an experienced process automation engineer to join the
Information Technology & Electrical Facilities Planning Division with our
Facilities Planning Department. This Division is responsible for the
coordination of planning of the Information Technology facilities, process
control systems, as well as electrical facilities for the entire corporation
in support of crude and gas programs. This is a senior engineering role where
the employee will work on the capital programs related to process automation
facilities. Duties and responsibilities include the following: * Conduct
feasibility studies on major addition and/or upgrades to existing facilities
* Perform system and economic analysis of existing and potential new control
systems * Direct evaluations of major control systems as performed by others
* Interface with operating organizations, engineering and project management
* Prepare scoping papers to define capital projects covering control systems
operations * Prepare and make presentations to Corporate Management on
control systems issues * Full-time advisor and consultant to Saudi Aramco
management and other organizations * Mentor young planning engineering for
future development to Facilities Planning Specialist Positions SELECTION CRITERIA: BS EE, ME or ChE.
Advanced degree preferred. Strong Project Economics background. 10 years
experience. Division Functions include: * Assisting in the technical
development and economic justification of the above organization's Capital
Programs and Budgets, including conducting long range engineering studies *
Providing technical assistance in the interpretation of Saudi Arab Government
directives * Providing technical coordination during the pre-construction
phase of non-Saudi Aramco projects which impact on Saudi Aramco facilities *
Developing feasible alternatives for individual capital projects *
Coordinating engineering feasibility studies * Reviewing project
specification with project management to insure economic design and
conformance with Design Basis Scoping Papers * Acting as interface for Saudi
Aramco with the Saudi Electric Company (SEC) for all future electrical energy
requirements, load forecasting and new electrical facilities Pipelines
Facilities Planning Specialist - E07-70017420B $115000 - 180000 We
seek an experienced electrical system specialist to join the Oil Facilities
Planning Division with our Facilities Planning Department. This Division is
responsible for coordinating planning for the Exploration & Producing
Business Lines' facilities in support of new crude development programs, and
facilities required as oil fields mature into secondary and tertiary recovery
phases, and assists in the technical development and economic justification
of its Capital Program and Budgets. . Duties and responsibilities include the
following: Conduct feasibility studies on major addition and/or upgrades to
existing pipeline facilities. Perform system and economic analysis of
existing and potential new pipeline facilities. Direct evaluations of major
pipeline facilities as performed by others. Interface with operating
organizations, engineering and project management. Prepare scoping papers to
define capital projects covering pipeline facilities operations. Prepare and
make presentations to Corporate Management on pipeline issues. Full-time
advisor and consultant to Saudi Aramco management. SELECTION CRITERIA Bachelors Degree in Mechanical / Chemical
Engineering (Advanced Degree preferred). A minimum of 10 years professional
experience (15+ years preferred); at least 10 years in pipeline operations
and/or capital planning. . Strong Project Economics background; (4)
Experience in conducting engineering studies. Experience in process/system
simulation of pipelines networks. Demonstrate excellent written and oral
technical presentation skills. Addressing Management Queries covering a
variety of areas including technical, economic, strategic and confidential
subjects. Petrochemical Facilities
Specialist - E07-70011688 $115,000 - $180,000* World's largest (reserves) oil
company (Dhahran, Saudi Arabia) seeks: Petrochemical Facilities Specialist *Note - above is only the base
salary ~ ($115/180K) - in addition there are uplifts, tax protection, COL
allowances, etc., etc. and the world’s best savings/retirement program.
Petrochemical Facilities Specialist E07-70011688 We seek an experienced
Petrochemical Facilities Specialist to join the Manufacturing Facilities
Planning division (MFPD) with our Facilities Planning department. The
division is responsible for coordinating and planning for the Refining
Marketing & International Business Lines new facilities and major
modification of existing facilities in support of crude and gas development
programs, and assists in the technical development and economic justification
of its Capital Programs and Budgets. Duties and responsibilities include the
following: Conduct feasibility studies on petrochemical facilities and
long-term business strategies related to these facilities Prepare scoping
papers to define capital projects involving petrochemical investments
Interface with Operating Organizations, New Business Development, Engineering
and Project Management Perform process/system and economic evaluations of
existing and potential new petrochemical facilities Direct evaluations of
major petrochemical facilities as performed by others Prepare and makes
presentations to Corporate Management on petrochemical operations issues
Provide full-time consultation to Saudi Aramco management and other
organizations Mentor the training of future Facilities Planning Specialists Minimum Requirement: BS Degree in ChE
(+Advanced Degree preferred in Economics or Engineering Management). A
minimum of 10 years experience related to Planning. Experience should cover:
performing economic evaluations, feasibility studies and preparing requests
for budgetary approvals; professional consultant in planning and executing
engineering studies, applying and analyzing process/system simulation and
economics of petrochemical operations. Excellent written and oral technical
presentation skills. Division duties include: Coordinating engineering
feasibility studies Developing alternatives for proposed capital projects
Developing and updating facilities and system master plans Preparing Design
Basis Scoping Papers which are the basis for project proposals Evaluating
feedstock supply opportunities for proposed petrochemical facilities, and
Technical support for crude classification & primary methodology
Providing technical assistance in the interpretation of Saudi Arabia's
Government directives Providing technical coordination during the
pre-construction phase of non-Saudi Aramco facilities Reviewing project
specifications with Project Management to insure economic design and
conformation with recognized engineering and safety standards. Gas Processing Engineers G17-70017348A ($110/180K) The candidate must demonstrate
outstanding technical capability, and ability to make substantial and
essential contribution on an individual basis. This includes individuals of
broad experience and of demonstrated ability and good judgment, and
individuals who are experts in a particular specialized area of Gas
Processing Engineering. . The increasing size and complexity of Saudi Armco's
Gas Operations requires Saudi Aramco to have in-house expertise in various
specialized areas of Gas Processing Engineering. The specialist position
provides for this expertise at increasing levels of recognized competence and
demonstrated ability to communicate with Management and working associates,
and to convert technical expertise into practical recommendations regarding
gas operation processes. . Apart from the broader areas of Gas Engineering,
the specialized areas of expertise in which the individual must have are
substantial gas plant field experience including one or more of the
following; Gas Treating, Gas Conditioning including Dehydration and Dew Point
Control, Gas Compression, Sulfur Recovery, and Natural Gas Liquids (NGL)
Recovery (including cascade refrigeration and Cryogenic Turbo-expansion). .
MINIMUM REQUIREMENTS: Bachelor of Science (B.S.) in either Chemical or
Mechanical Engineering with minimum of (10 to 15) years of Gas Engineering
that includes field gas plant or refinery experience; or Master of Science
(M.S.) in either Chemical or Mechanical Engineering with minimum of (8 to 10)
years of Gas Engineering experience including field gas plant or refinery
experience. Electrical System Facilities Planning Specialist - E07-70017419B POSITION DESCRIPTION We seek an
experienced electrical system specialist to join the Information Technology
and Electrical Facilities Planning Division with our Facilities Planning
Department. This Division is responsible for the coordination of planning of
the Information Technology facilities, process control systems, as well as
electrical facilities for the entire corporation in support of crude and gas
programs. . Duties and responsibilities include the following: Conduct
feasibility studies on major additions/upgrades to electrical distribution
and transmission systems and emergency backup systems for petrochemical,
product and distribution facilities in oil and gas. Coordinate initial power
supply agreements and increments with Utilities. Prepare scoping papers to
define capital projects covering electrical systems facilities. Interface
with Power Distribution Department, operating organizations, engineering and
project management. Perform economics evaluations and reliability studies on
existing and new potential electrical distribution and transmission
facilities. Direct evaluation of electrical systems as performed by others.
Conduct long term forecast and market research of power generation issues
related to pricing, consumption and power export. Prepare and make
presentations to Corporate Management on electrical systems issues. Full-time
advisor and consultant to Saudi Aramco management and other organizations.
Mentor new facilities planning engineers for future development to Facilities
Planning Specialist positions. SELECTION
CRITERIA Bachelors Degree (Advanced Degree preferred) in Electrical
Engineering. A minimum of 10 years professional experience (15+ years
preferred); at least 10 years in electrical power distribution and
transmission systems planning & operations in a public utility and/or
capital program planning. Experience in evaluating existing and designing new
substations, switchgear, and MCCs 480V through 380kv. Experience in
performing economic evaluations, feasibility studies and preparing requests
for budgetary approvals. Experience with professional consultant in planning
and executing engineering studies. Experience in applying and analyzing
system simulation and modeling of electrical distribution systems using
computer software such as E-TAP and similar software. Experience in
conducting market research related to long term evaluation of power export
opportunities. Experience in developing corporate strategies and master plans
for electrical distribution and transmission systems. Experience in
conduction load flow, motor starting, short circuit and dynamic stability
studies. Possess excellent written and oral technical presentation skills.
Note Client has mandatory retirement at 60. DISTRIBUTION & TERMINALS FACILITIES PLANNING
SPECIALIST
E07-70008261 We seek an experienced
Distribution & Terminals Specialist to join the Manufacturing Facilities
Planning division (MFPD with our Facilities Planning department. The division
is responsible for coordinating and planning for the Refining Marketing &
International Business Lines new facilities and major modification of
existing facilities in support of crude and gas development programs, and
assists in the technical development and economic justification of its
Capital Programs and Budgets. Duties and responsibilities include the
following: Conduct feasibility studies on major additions and/or upgrades to
existing bulk terminals and distribution facilities and long-term product
business strategies Perform process/system optimization and economic analysis
of existing and potential new bulk terminals and distribution facilities
Direct evaluations of major bulk terminals facilities as performed by others.
(4) Interface with operating organizations, engineering and project
management Prepare scoping papers to define capital projects covering bulk
terminals and distribution facilities operations Prepare and make
presentations to Corporate Management on product distribution issues
Full-time advisor and consultant to Saudi Aramco management and other
organizations Mentor young planning engineering for future development to
Facilities Planning Specialist Positions Minimum
Requirement: Bachelors Degree in Chemical or Mechanical Engineering
(Advanced Degree preferred in Chemical or Mechanical Engineering). A minimum
of 10 years experience related to bulk terminals and distribution process;
experience in performing economics evaluations & feasibility studies, and
in preparing for budgetary approvals; experience in applying and analyzing
hydraulic and/or batching simulations; and possess excellent written and oral
communications and technical presentation skills. Division duties include:
Coordinating engineering feasibility studies Developing alternatives for
proposed capital projects Developing and updating facilities and system
master plans Preparing Design Basis Scoping Papers which are the basis for
project proposals Evaluating feedstock supply opportunities for proposed
petrochemical facilities, and Technical support for crude classification
& primary methodology Providing technical assistance in the
interpretation of Saudi Arabia's Government directives Providing technical
coordination during the pre-construction phase of non-Saudi Aramco facilities
Reviewing project specifications with Project Management to insure economic
design and conformation with recognized engineering and safety standards . Chemical
Engineers O03-70010794I,
O03-70010794G POSITION DESCRIPTION The Engineer will be required to support
the Refinery in the field of chemical process engineering covering all aspects
from conceptual design, through detailed engineering, day-to-day activities,
and long-term performance improvements. The successful candidate is expected
to: Familiar with process design, reporting, and daily unit operation
monitoring. Have the experience in detailed engineering studies that includes
economic analyses, process simulations, and project-related activities.
Review and coach less-experienced engineers on all aspects associated with
established process engineering requirements. Has the proficiency in safe
operations of process units, including familiarity with process safety
elements such as MOCs, HAZOPs, P&IDs and behavioral safety. SELECTION CRITERIA BS Chemical Engineering. Expertise in the
areas of distillation, reforming, and/or hydro cracking. Minimum of 10 years
experiences as a process engineer related to refinery, oil and gas industry.
Excellent communication skills in oral and written English. Must have
Participated in project commissioning, field problems troubleshooting in oil and
gas related industries. Must have a thorough knowledge of engineering
practices, international standards, and economic principles related to
incumbent's field. Refinery
Business Development Specialist F30-70006278 Saudi:
Base $140/240K +o'seas pkg, tax protected, savings & super retirement
progs. Family status, career
jobs. Mandatory retirement @ 60: want
cand w/ 10 yrs left to work MINIMUM REQUIREMENTS: BS Business Administration, Economics,
Accounting, Engineering or its equivalent. Graduate degree is desirable.
Advanced professional competence evidenced by professional licenses and other
forms of continuing professional education. Experience: 12 years relevant
experience in business development. Will be highly knowledgeable in business
development, will possess relevant industry expertise and will have solid
experience in specific venturing activities such as commercialization,
spin-offs or joint venturing. Language: Proficient in oral and written
English. Some command of Arabic is beneficial but not essential. POSITION DESCRIPTION: The position is responsible for sourcing,
conceptualizing, screening, analyzing, planning and developing new business
ventures of variable dimensions, related to both refining and petrochemical
businesses or combined integrated businesses in the Kingdom of Saudi Arabia.
The position handles from non complex business ventures in the order of
millions of dollars (5 to 10) to very large and complex deals in the order of
several billions of dollars (10 Billion $ +). The position interacts with
both high level internal positions in the company such as Project Management,
Corporate Planning, Facilities Planning, Joint Ventures Development,
Vice-presidents and Senior Vice presidents, as well as with high level
external business executives from the refining and petrochemical sector,
seeking for the development joint investments in the Kingdom of Saudi Arabia.
It also interacts with high level advisors or consultants in the sector, and
coordinates the execution of studies, price scenarios, economic &
financial analysis related to the portfolio of projects at hand. The position
demands business development expertise with primarily focus on joint refining
and petrochemical ventures development, and as a minimum a strong background
in the development of large petrochemical ventures, where several alternative
feedstock's may be selected, with highly complex process configurations and
with the need for a clear understanding of economies associated to chemical
value chains. The position entitles the following regular activities: Manage
business development process from screening through deal closure, Prioritize
business proposals against investment criteria and Company business portfolio
strategy , definition of scope and objectives for any particular business,
with creativity to offer technical and commercial solutions for deal
conclusion, revision of investors proposals and capacity to elaborate contra
proposals, build, update and/or modify process blocks and economic models in
excel or equivalent software to represent both refining and petrochemical
integrated process units and their inherent financial economics indicators,
regular access to technical and economic data bases such as SRI, CMAI, ICIS,
etc in order to provide technical and economical knowledge and support to
business development teams or executive or management levels, generate yearly
reports describing the chemical industry market trends, the top players
position, petrochemical commodities demand growth trends, demand/supply
balances, identification of areas of opportunity for investment, potential
partners pre-screening, Clear understanding and articulation of commercial
driven strategies for business development, capacity to work both on an
individual or team basis assignments and work with both internal
organizations and external investors and advisors to promote new business
opportunities In the Kingdom of Saudi Arabia DUTIES/RESPONSIBILITIES: The Business Development Specialist
will: Manage business development process from screening through deal
closure. Drive screening and validation activities to progress proposals
through stage gates. Prioritize business proposals against investment
criteria and NBD portfolio strategy. Lead efforts to formulate a resource and
funding plans to transform business proposal from Concept to a closed deal.
Serve as a liaison between NBD and the internal proponent organization. Lead
business planning and economic modeling. Determine the scope and objectives
of the deal, offering messages and "technical" solution that make
up Saudi Aramco's business offering. Assemble initial offerings to potential
investors. Lead investor selection activities. Coordinate with Saudi Aramco
subject matter experts to draft Memorandums of Understanding/Letter of
Intent. Participate in creating the commercial, financial and technical
framework for the deal. Prepare for and conduct negotiations to secure a deal
is consistent with Saudi Aramco's offer, investor expectations and set
parameters Ensures compliance to process stage gates and approvals. Approves
contract payments and variations within limit. Provides administrative
direction and personnel management to all assigned Business Development
Analysts. Perform other miscellaneous duties as directed. Process
Modeling Specialist E01-70010406 POSITION DESCRIPTION: Company is seeking an Engineering
Specialist whom will have proven ability to develop Process Simulation Models
of the Companies Oil & Gas Industry and/or Refinery Processes. • Essential Job Functions: Incumbent will be expected to analyze
and reconcile Data and develop process models in HYSYS and/or PROII and/or
Aspen Plus. Incumbent will be requested frequently to develop Reactor Models
using AspenTech Technology and/or integrated models in RefSys will be an
advantage. In support of the Companies strategy to integrate engineering and
business software, will be required to develop LP Planning models from time
to time. Should be able to use these models to support Design Studies,
Debottleneck Studies, and PIMS Planning Models. Incumbent will be required to
convert steady state models to dynamic models. Will be asked to provide
technical support to resolve difficult simulation problems that process
engineers in the plants or in central engineering have difficulty with. The
candidate will represent the Company and publish his work at internationally
recognized conferences. SELECTION CRITERIA: MS degree in Chemical Engineering with 7-10
years experience using Process Simulation as part of his day to day work,
with detailed knowledge of one or more Process Simulator (HYSYS preferred) .
Incumbent should have extensive knowledge (5 to 10 years) of either the Oil
& Gas Industry and/or Refinery. Should be able to carry out technology
evaluation studies and make recommendations to Management on technology
selection. Knowledge of LP Planning Techniques is preferred. It is a plus if
knowledgeable with pipelines simulation such as Pipephase, Olga, or Stoner.
Incumbent must have excellent written and verbal English skills with
experience in developing standards and technical reports. Incumbent should
possess excellent computer skills. Has published several technical papers in
international recognized journals and conferences. COMMENTS: Process and Control System Department (P&CSD)
provides specialized technical engineering studies and consultations for
corporate operations, capital programs, and to advance corporate
profitability objectives through engineering standards, Best Practices,
simulation modeling and application of new and emerging technologies. The
Pipeline and Simulations unit of P&CSD is responsible for promoting and
implementing new simulation technologies, developing process and pipeline
models, providing second level support for process engineers in issues
related to modeling and simulation, conducting technical engineering
screening studies, developing standards and best practices within and
develops and disseminates knowledge throughout the company. REFINERY
PLANNING ENGINEER U01-70010036B The role: Saudi Aramco Oil Supply & Planning Department
(OSPAS) is looking for a dynamic refinery planning engineer to work in the
general area of refinery planning with specific emphasis on developing
short-term, medium-term and long-term plans.
Also required will be updating and maintaining the linear program (LP)
models and providing ad hoc analysis using the LP models. OSPAS provides an unrivalled environment for creativity and
innovation in the downstream sector by developing cost-effective solutions to
meeting the production and distribution of refined products throughout the
Kingdom of Saudi Arabia. It offers the
successful applicant a unique workplace in which to further expand technical
and professional skills underpinned by a strong commitment to training and
personal development. Key
Responsibilities: • Organize, prepare,
and execute a short-term (4 months), medium-term (1 year) and long-term (10
year) plan using Aspentech PIMS. • Review the accuracy
of the LP models for each refinery on a monthly basis by performing model
reconciliation and backcasting analysis.
This will require trips to each refinery to work with refinery
engineers. • Work on ad hoc
studies when they arise by running the LP models. • Develop and modify
planning reports written in Microsoft Excel using Visual Basic for
Applications (VBA). Minimum
Requirements: BS in Chemical Engineering Experience: 10 or more years of refining experience. 7 or more
years refinery planning experience using Aspentech PIMS. Experience with Microsoft Excel and the
Visual Basic for Applications (VBA) programming language. Sr.
Inspection Engineers - A62-70012856A, A62-70012856B POSITION DESCRIPTION: The implementation of a Safety Management System
(SMS) has made it essential to employ an experienced and knowledgeable Safety
Engineer who can fully transform SMS elements, expectations and processes
into specific Safety actions that can be reliability adhered to in the
operational fields. The SMS require a depth of safety analysis, thorough
assessments and risk evaluation that cannot be found among our existing work
force. SELECTION CRITERIA: Education: BS Engineering. Experience: Seven years in the oil industry or
similar process industry. The primary function of the Safety Engineer will be
focused on the following: Be an advisor for WRDD Safety Management System.
Review Operations and Maintenance safety procedures, develop and recommend
improved processes as necessary. Represent the department in investigating
plant and near misses incidents. Perform hazard analysis and provide risk
assessment strategies. Review proposals and designs for new installations to
determine that these installations can be operated and maintained
efficiently, safely and economically. Review new facilities during the
construction phase to determine that the facilities installed are as designed
and are adequate to accomplish the objectives of the project. Initiates
corrective actions, if required. Review and investigate the performance of
individual plants as required to highlight and identify problems or potential
problems that may arise. Develop and recommend corrective courses of action.
Assist in the preparation and review of Operating and Maintenance general
instructions. Provide technical consultation and prepares special studies on
Operational and Maintenance problems and concerns as required by management.
Assist in the development of Saudis and the training of operations and
maintenance personnel in Safety related issues. Manage the Safety
recommendation tracking database and track performance measures. Adv.
Process Controll Automation Engineer E01-19109768 MINIMUM REQUIREMENTS: Education: BS Chemical, Electrical, or
Mechanical Engineering. Experience: 10 years in advance process control (APC)
with sound understanding of oil and gas processes. Experience should include
gas plants, NGL fractionation, and complex refinery units such as crude
units, hydrocrackers, and reformers. Should have significant relevant working
knowledge that includes proven experience in an operating plant. Should
possess a strong working knowledge of base-layer process controls (regulatory
controls), a mastery of multivariable predictive controls (MPC), and
knowledge of optimization, distributed control systems (DCS) and
instrumentation. Should have knowledge of process simulations, economics and
business development. Commercial experience with an APC vendor or project
management skills would be a plus. Specific experience is preferred with any or
all of the following MPC technologies; Apen Tech's DMCplus, Honeywell's
Profit Controller, and Shell/Yokogawa's SMOC. Petrochemical
Consultant T27-19107719 Saudi:
Base $140/240K +o'seas pkg, tax protected, savings & super retirement
progs. Family status, career
jobs. Mandatory retirement @ 60: want
cand w/ 10 yrs left to work. Minimum Requirements: Education: Bachelor Degree in business,
Engineering or Marketing in addition to Masters in Business/Commerce desired.
Experience: 15 years experience in a broad spectrum of chemical industry
(Particularly Olefins, Aramatics or close) value chains. Experience should
include downstream oil industry, particularly refining, marketing, retailing,
and branding. A general knowledge of joint venture development, business
acquisition analysis and refined products distribution is preferable.
Knowledge of refining and petrochemical process systems. Thorough and
complete understanding of due diligence processes with direct experience in
techno-economic evaluations. Understanding of the key business drivers in the
chemicals business through functional experience in the areas of
technology/operations, business planning/investment analysis, marketing
and/or purchasing. Demonstrated leadership/management skills. Recognized in
the chemical business-preferably member of some expert group/panel. Strong
English communication skills (written/spoken). Willing to travel. BASIC FUNCTION Acting as the primary interface for the
coordinators related to various Saudi Aramco joint ventures, the company's
petrochemical group and other relevant Aramco organizations, this challenging
position will assume a key role in the proposed Center of Petrochemical
Excellence at Saudi Aramco. The position is a middle management position reporting
directly to the Director of Joint Venture Coordination Department (JVC). PRINCIPAL DUTIES Identifies overlaps and proactively manages
optimization activities across Saudi Aramco joint ventures that have a
petrochemical element. Understands refinery inter linkages with
petrochemicals and becomes the main interface with in-house and external
refinery experts to support current and proposed joint venture chemical
operations. Well conversant with the appropriate sources to secure market
intelligence and technical data for various chemical businesses. Will lead
efforts to develop and maintains a knowledge reservoir for petrochemical
group. Develops and ensures compliance of potentially new business processes
arising out of the chemicals business participation with current Aramco
organizations and internal standards. Develops and actively mentors a self
motivated team of industry experts and specialists in the areas of chemicals.
Identifies potential skills gaps and identifies potential measures to close
such gaps including hiring of new resources. Recommends and implements
solutions to improve chemicals group efficiency. SCOPE Working independently and with considerable latitude with
only general guidelines from the Director of JVD&SD, is responsible for
directing joint venture support activities globally. Gives work direction for
three senior consultants and sets priorities for two specialists. Interprets,
parses and sets deliverables to meet internal and joint venture company needs
with respect to marketing, investment analysis and technical aspects of joint
ventures petrochemical portfolio. Interfaces with refinery team personnel as
required providing a complete work product. Serves as one of the core
individuals for building Aramco's center for petrochemicals excellence
through continual monitoring of chemical industry developments and interface
with key industry players. Actual locations of work may vary and work may
require travel to joint venture or other locations. Fuel
Separation/Treatment Eng E01-70010412 POSITION DESCRIPTION: Saudi Aramco is seeking an Engineering
Specialist with extensive experience in the separation, fuel treatment and
hydrotreating processes in the petroleum refining to support clean fuel
program as initiated companywide in the Saudi Aramco Refineries for
environment compliance. The engineer will join with the highly technical
group in Downstream Process Engineering Division under Process and Control
System Department. The candidate will play a leading role in providing
supports to the process engineering and technical services functions related
to the field of clean fuel development program. This includes performing
process design, feasibility and optimization studies, evaluate application of
new technologies and best practices, define scope for the plant and hardware
modifications, and participate in selecting process licensor and catalyst
vendor to fulfill the requirements as stated in the clean fuel development
program. In addition, incumbent will support the capital program associated
with clean fuel development program at different stages since its inception
to project completion. This includes participating with the team for
screening study, development of design basis document, reviewing PFD,
P&ID, front-end engineering, project specifications, detailed engineering
documents, and provides technical support during construction and
commissioning activities. Incumbent should be able to determine the
consequences of fuel quality specification change to other separation and
treating processes in the refinery by using simulation model and tool and
recommend optimum and cost effective configuration to achieve clean fuel
objective. Knowledge of worldwide automotive fuel specification is essential.
Exposure of industry standards applicable to petroleum refining is desirable.
The position requires excellent computer, oral and written communication and
presentation skills. SELECTION CRITERIA: B.S. in Chemical Engineering with minimum 10
years experience in the petroleum refining industries. This includes thorough
knowledge and experience in the Crude & Vacuum Distillation, Fuel Gas
Treating, Naphtha/Kerosene/Diesel Hydrotreating units. Exposure of
hydroprocessing such as hydrocracker or cat cracker and other separation
process such as solvent deasphalting and asphalt blowing is desirable.
Knowledge of clean fuel development program being implemented worldwide is
essential. Experience includes performing process engineering, carrying out
various feasibility, debottlenecking and optimization studies to mitigate
challenges associated with the refining business. Sufficient experience
related to capital project implementation is essential. This includes
performing heat & material balances, developing PFDs/P&IDs, process
control & automation including emergency shutdown system, participating
in PHA and value engineering, preparing process design basis, evaluating
process licensor and catalyst vendor for new catalyst selection. Knowledge of
refinery integration between primary/secondary/treating units, product
quality/specification and their control are essential. He should be familiar
with industry practices including relevant national and international
standards. Should be conversant with the use of process software such as PRO
II, HYSIS, ASPEN, HTRI. Possess effective communication and leadership skill.
Mentoring young and in-experienced engineers is desirable. COMMENTS: Process and Control System Department (P&CSD) is a
leading department under Saudi Aramco Engineering Services that provides
specialized and high level technical services and consultations to the
operating facilities and other Saudi Aramco organizations. Areas of technical
support include operation support, research & technology, capital program
support, protection of the environment, knowledge sharing & innovation
and talent development. The downstream process engineering division is one of
the critical entity under P&CSD that provides support and expertise to
Saudi Aramco Refining through three key units such as Distillation &
Treating, Catalytic Conversion and Flare & relief systems. Maintenance
Engineer A65-70004154C POSITION DESCRIPTION: Candidate will work as a senior
reliability coordinator in the Reliability Unit in Ras Tanura Refinery. The candidate
will be responsible for assessing the refinery equipment and work processes
reliability and monitoring the implementation of all reliability improvement
plans. In addition, he will have the following duties: Provides technical guidance for reliability
& maintenance data by assessing SAP data history for accuracy and
compliance with reliability best practices. Identifies reliability data
collection processes to sustain KPI's consistency. Endures that equipment are
performing effectively and efficiently (current vs. design speed and
capacity). Establishes and monitors programs for critical equipment analysis
and condition monitoring. Establishes, in conjunction with maintenance
engineers, maintenance programs for critical equipment. Lead teams to handles
and finds solution to equipment chronicle problems. Serves as the focal point
for monitoring KPI's for maintenance and operation management teams. Assists
in new installations design and any design changes within the facility.
Coordinates closely with counterpart in-house organization (production
engineers and planners, design engineers, etc.). Analyzes equipment operating
data and evaluates equipment overall effectiveness. Reviews yearly business
plan with planners & engineers to identify T&I hours requirements.
Evaluates plant and equipment unscheduled downtime proportions. Identifies
reliability improvement opportunities. Develops reliability strategies to
monitor plants equipment performance according to business targets. Links
plants high level performance picture to maintenance performance and
equipment performance (downtime and performance breakdown structure).
Promotes and sustains reliability and maintenance program integration.
Promotes reliability best practices integration to plant operations. Promotes
and implements reliability & maintenance projects (TPM, RCM, CBM, ODR
etc) Develops metrics for quality assessment and control. Develops and
calculates reliability metrics (MTBF, MTTR, failure rate,.ect). Coordinates
identifying plant critical assets according to production targets. Updates
equipment criticality list according to production business plan changes and
targets. Coordinates critical spare parts reviews. Develops proactive RCA and
FMECA analysis for critical equipment. Leads and facilitates failure
investigation for critical equipment, generates reports, actions logs and
follow-up in their closure. Monitors worldwide reliability and maintenance
best practices concepts, techniques and tools (magazines, conferences, books,
etc.). Develops learning logs from critical failures investigation and
implements them for other equipment. Generates monthly bad actors report and
follows-up in gap closure. Organizes reliability day to promote reliability
practices, benefit and results. Performs cost/benefits analysis for technical
solutions. Maintenance
Planner A62-70007104 POSITION DESCRIPTION: Serve as Group Leader of Planners under
the Planning & Material unit Supervisor where he supervises all planners
and act as Maintenance Division expert on all matters related to plans,
estimates and schedules for Maintenance orders and provide advice to all
concerned parties. Conducts regular auditing of the planners works to assure
all corporate procedures & guidelines are being followed consistently which
is part of the Quality Assurance Program. Monitors, analyzes, recommends
strategies and coordinate with Operations, Maintenance and Management for
corrective action in timely manner. Responsible for supervising and
coordinating all maintenance planning and scheduling works within maintenance
division for routine maintenance jobs. Extracting all reports from SAP &
all other associated reports from Saudi Aramco Maintenance Management Program
to provides clear, concise input of performance trends to supervision and
Management in timely and efficient manner, so that corrective action can be
taken to ensure that plant reliability and maintenance cost is optimized at
all times. Prepares weekly, monthly and yearly Planning KPIs to track
Maintenance activities within corporate guidelines. Communicate regularly
with Unit heads, operations foremen, Maintenance Group Leader, Maintenance
Foremen, Engineers, Inspectors, Senior Craftsmen, material Division and
Buyers and MRP Controllers to carry out smooth planning activities.
Coordinates all Maintenance jobs referred to other departments e.g. MSSD
& PDD. Attends regular meetings with concerned parties to resolve variety
of planning issues to smooth line maintenance activities. Attends Planning
Best Practice team meetings to share the planning knowledge with all Saudi
Aramco Refineries team members. Demonstrates effective reports writing &
computer skills such as word, excel, PowerPoint etc. Responsible for training
& job skills enhancement of Saudi Planners and Material controlmen as
certified Saudi Aramco Evaluator. Works as department SAP specialist &
coordinator to provide all required assistance & guidance to all SAP end
users. Principal duties will generally fall in to the following areas:
competencies and Job Knowledge, Leadership and Communication. Safety and
Initiative and Certification and Training. These are as follows, 1. Ensure
that all Maintenance Planning activities are complying with G.I. 1000.500. 2.
Supervises all maintenance planners in the Unit. 3. Prepares a division
summary of work orders status. 4. Provides regular analysis of backlog data.
5. Recommends corrective actions to achieve goals. 6. Plan Maintenance Work
orders Types PM01/04/06. 7. Assist planners to Plan Job Steps in proper
execution sequence. 8. Guide planners to Plan Material using previous or
existing job plans. 9. Check Job sites for critical jobs to determine
specific job requirements. 10. Assist planners to Estimate & Plan Craft
man # Hours and crew for each step properly. 11. Assist planners for accurate
cost estimations of Maintenance orders. 12. Assist planners in identification
of correct materials from equipment / vendor manuals. 13. Assist planners to
determine any inspection, special tools requirements for critical jobs. 14.
Assist planners to plan material & manpower effectively for critical
jobs. 15. Assist Material group in verification of Material Stock levels /
Critical Spares. 16. Recommend 9COM Materials for cataloging. 17. Ensure to
use on #hand materials by planners. 18. Work with Material group to identify
& catalog the non cataloged material. 19. Keep track of non committed
materials and expedite delivery thru material group. 20. Ensure right Status
of Maintenance orders is maintained. 21. Ensure about Unit Ranking / Plant Ranking
of all Workable maintenance orders. 22. Schedule support service equipment as
needed. 23. Check surplus materials are returned to storehouse by Area
Planners in timely manner. 24. Assist planners to Plan a major equipment
overhaul. 25. Assist planners to Prepare a sub-order to other department. 26.
Prepare a material availability report. 27. Prepare a work order backlog
report. 28. Ensure to have comprehensive daily & weekly schedules
prepared by planners. 29. Monitor all Maintenance orders costs to avoid
budget exceed. 30. Ensure Equipment History is properly maintained for all
Maintenance work done. 31. Prepare Standard job Plans as reference for
planners. 32. Ensure all Maintenance orders against completed jobs are closed
in SAP by planners. 33. Provides maintenance performance monitoring data. 34.
Work with minimum supervision. 35. Coach and mentor lower grade codes. SELECTION CRITERIA Minimum Thirteen (13) years maintenance
experience in primary craft. Should have Diploma of Engineering. Should be
familiar with SAP & Saudi Aramco Material system. Must possess a sound
knowledge of the planning and scheduling skills. Must be conversant with the
safety rules applicable in the refinery business. Must be company approved
driver. COMMENTS: Riyadh Refinery require immediate & prompt trouble
shooting of all defective equipment because of its complexity &
criticality as being a unique land refinery and because of its corporate
& national commitments. In addition, the typical configuration of Riyadh
Refinery by having sole standby equipment for critical machines requires
special attention because any such equipment failure could lead to total
Refinery shutdown. Planning & Material unit is responsible for all
planning activities in term of Planning & scheduling including ordering
of required material to complete the Maintenance jobs in a very timely manner
to avoid any plant operation disturbance. Process
Control Engineers O03-70008823A,
O03-70008823C, O03-70008823D POSITION DESCRIPTION: The Engineer will be required to support
the Refinery in the field of Process control engineering covering all aspects
from conceptual design, through detailed engineering, day-to-day activities,
and long-term performance improvements. The successful candidate is expected
to: Have thorough knowledge about control systems specifications and design
related issues. Provide support and troubleshooting for any process control
related operational and maintenance field problems. Act as a DCS system
reference/information source to refinery and provide operations and plant
maintenance groups with the system technical support required. Perform
modification to DCS database, Plant schematics, CL programs and logic as
required. Responsible for the design, configuration and implementation of
Emergency Shutdown System (ESD). Provide support to auxiliary systems PLC#s
like Allen Bradley..etc, and compressors control systems. Review, design, and
troubleshoot various DCS and auxiliary systems networking and integration
related issues. Provide support to field instrumentations. Review control
systems project proposals and design packages, conduct equipment factory
acceptance test (FAT) and site acceptance test (SAT); hot cutover,
commissioning; and support new plants start up. Coordinate, commission; and
support Advanced Process Control (APC) applications. Review company
engineering standards and participate in standards reviews committees. SELECTION CRITERIA: BS Chemical/Electrical or Systems
engineering. Minimum of 10 years experiences in process control field related
to refinery, oil and gas industry. Basic knowledge in refinery chemical
processes. Excellent communication skills in oral and written English. Must
have Participated in project commissioning, field problems troubleshooting in
oil and gas related industries. Must have a thorough knowledge of engineering
practices, international standards, and economic principles related to
incumbent's field. Process
Engineers O03-70010790B, O03-70010790A, O03-70010794C POSITION DESCRIPTION: The Engineer will be required to support
the Refinery in the field of chemical process engineering covering all
aspects from conceptual design, through detailed engineering, day-to-day
activities, and long-term performance improvements. The successful candidate is expected to: Be familiar with
process design, reporting, and daily unit operation monitoring. Have the
experience in detailed engineering studies that includes economic analyses,
process simulations, and project-related activities. Review and coach
less-experienced engineers on all aspects associated with established process
engineering requirements. Have the proficiency in safe operations of process
units, including familiarity with process safety elements such as MOCs,
HAZOPs, P&IDs and behavioral safety. SELECTION CRITERIA: BS Degree in Chemical Engineering. Expertise
in the areas of reforming and platforming. Minimum of 15 years experiences as
a process engineer related to refinery, oil and gas industry. Excellent
communication skills in oral and written English. Must have participated in
project commissioning, field problems troubleshooting in oil and gas related
industries. Must have a thorough knowledge of engineering practices,
international standards, and economic principles related to incumbent's
field. Refinery
Corrosion Control Engineer O03-70010655 POSITION DESCRIPTION: The incumbent of this position will be
part of the refinery inspection unit responsible for resolving problems in
corrosion control and materials performance affecting the refinery process
and utilities units. Incumbent should be an expert in one or more recognized
engineering fields and incumbent is required to undertake or coordinate
complex engineering work such as the following: 1. Interface with refinery
personnel and provide expert advice and front line technical support to
maintenance and operation on all corrosion control activities throughout the
refinery. 2. Monitor corrosion within the refinery units and provide
recommendations periodically to minimize/control the corrosion rate. 3.
Evaluate the effectiveness of the corrosion inhibitors in the refinery and
assist the refinery in benchmarking the corrosion control practices with
other practices used in the industry. 4. Performs corrosion failure
investigations and special corrosion related studies. 5. Reviews corrosion
mitigation and monitoring activities in the field to identify needed system
modifications or procedural changes. 6. Initiates and conducts special
studies to minimize/control the corrosion in the refinery units to improve
the facilities operation. 7. Provides special technical service, consulting
and assisting in design and construction of corrosion control projects. 8.
Work with concerned area inspectors and process engineers to monitor and
control process parameters related to corrosion. 9. Provides expert advice
and assistance on matters pertaining to corrosion and scaling prediction,
corrosion mitigation and monitoring, hydro-testing and equipment preservation
(mothballing). 10. Act as mentor to develop a competent Saudi Arab corrosion
engineers. 11. Recommends new technologies in the field of corrosion. SELECTION CRITERIA: The incumbent of this position must have a
BS Degree in Chemical or Mechanical Engineering with 10 years of continuously
progressive engineering experience of which 8 years experience in corrosion
monitoring and control activities. The incumbent shall: Holds API 510,
API570, AWS, RBI, Coating, NDT and any other Certificates related to Inspection
are Preference. Has sound knowledge of international codes/standards
applicable to inspection (ASTM, API, ASME, TEMA, NACE, ANSI, etc,). Has
thorough knowledge of various forms of corrosion and their identification
along with monitoring and mitigation methods. Has through knowledge in
refinery processes is required. Also, experience in chemical inhibitors
treatment, cathodic protection, material selection and coating protection is
required. Has excellent English communication skills (verbal and written). Be
able to work independently in a new work situation and guide/train local
assistant inspectors. Had attended related NACE corrosion courses with NACE
membership with major technical contributors in studies and research. Refinery
Electrical Inspection Engineer A62-70012855 POSITION DESCRIPTION: The incumbent will be part of the
inspection unit at the refinery. He is required to perform full range of
electrical equipment inspection functions specific to an assigned unit or in
a branch of inspection function. Responsibilities shall include: Verify,
inspect and witness ground installations on tanks, equipments and non process
area's and recommend corrective actions. Verify inspect & witness general
area/street/plant lighting and report any findings and recommend corrective
actions. Verify, inspect & witness installation of all major electrical
components in substations including but not limited to transformers, HV &
LV switchgear, control gear, bus-bars, panels, auto change over switches,
voltage regulators, distribution panels and their associated wiring. Verify,
inspect and witness installation of all cable trays, underground cables,
conduits, wire ways and recommend corrective actions for any findings.
Verify, inspect and witness CP measurements and witness installation of
anodes, cables, rectifiers and field junction boxes. Also, carry out
quarterly and annual surveys on the installed systems. Issue inspection
worksheets to report any findings and follow up on the execution of the
findings. Coordinate with area inspectors on all outstanding activities.
Prepare monthly reports on electrical works activities. Monitor electrical
work on a project and prepare exception item list for contractor to comply
prior with acceptance of mechanical completion. Review drawing design
packaged submittals. Ensure that all records, files and database are updated
with all inspection work sheets, findings and status of repair. Train young
Saudi electrical inspectors. SELECTION CRITERIA: The incumbent shall hold B.S. Degree in Electrical
Engineering with 5 years in refining or similar process industry as
Electrical Inspector. The incumbent shall: Hold National Electrical Code
(NFPA 70) certification and any other related certification. Demonstrate a
thorough working knowledge of the National Electrical Code / NFPA 70, I.EC
ANSI, NEMA or equivalent standards. Have a thorough knowledge of all types of
electrical installations including materials, methods, specifications,
packaged units and hazardous location identification for the oil and gas or
petrochemical industries. Have documented experience in the field of Cathodic
Protection and be able to demonstrate a thorough working knowledge of
international codes and standards, NACE or equivalent and be able to inspect
CP systems and its related components namely rectifiers, anode beds, cable
installations and be able to interpret survey reports. Inspectors shall
demonstrate the ability to read engineering drawings, trouble shoot problems
and review design packages to meet all relevant engineering requirements. COMMENTS: Riyadh Refinery was commissioned in 1981 and has a
design capacity of 120 MBD. Engineering Div. provide the necessary
Engineering support to process facilities in the fields of Operation
Engineering, Manufacturing Planning, Technical support, project and
Inspection. Inspection unit role is condition monitoring of all static
equipment and piping for the continued safe and reliable operation of the
Refinery and provide necessary inspection and engineering support with timely
advice for advance planning for the refurbishment/replacement of the
equipment and piping per relevant Saudi Aramco & International
procedures/ standards with appropriate and up-to-date records. Refinery
Inspection Engineer A73-70007807 POSITION DESCRIPTION: Performs full range inspection engineering
functions specific to an assigned unit or in a branch of inspection function.
Responsibilities shall include on-stream and shutdown inspections of the
plant, execution of corrosion control programs, project quality control, weld
quality administration, material control and preparation of various
inspection reports with appropriate repair/replacement recommendations and
keep a continuous track on such recommendations. Performs duties of the Unit
Inspection Engineer and handles day to day inspection activities as well as
the long term inspection planning and, execution of such programs with good
OME coordination including construction sites or maintenance projects to
resolve inspection related problems, or appraise adequacy of inspection and
safe operation. Ensures that all unit equipment and piping records are
updated and entered into a computer data bases. Periodically review the data
base information and ensures that appropriate repairs/replacements to the equipment
are recommended. Also assures that all required on stream inspections such as
NDT are performed on time. Visits the Process Unit and the Operations Control
Room daily and reports the highlights to the Inspection Supervisor and Area
Proponent. Also coordinates inspection related activities with the Operations
and Maintenance Divisions. Uses effectively the industry practices and codes,
particularly with ASTM material standards, ASME Sections I, V, VIII, IX and
API 510, 570, 653 specifications as well as AWS and NACE . Conducts refinery
equipment design calculations and remaining life assessments for in-service
equipment and evaluate methods, techniques and material utilization for
extended run lengths. Understands the company objectives with emphasis to
quality goals and work to help achieve them. Always values team efforts,
respects others and other work disciplines, and demonstrates flexibility
while ensuring the inspection goals are safely achieved. Continue association
with local and international professional societies and institutions related
to his degree major and takes the advantage of the technical literature and
seminars available through these professional bodies. Responsible for
reviewing all technical problems relating to inspection engineering and to
assist the Unit Supervisor in solving such problems. The primary
responsibility, however, is to see that all construction and maintenance
projects are completed according to all applicable codes and standards.
Incumbent is responsible for keeping adequate equipment inspection records,
failure and repair histories and ionizing radiation incident data. Provides
technical support to Operations, Maintenance, Purchasing and Project
Management in resolving problems concerning inspection methods and procedures
of completing work within the scope and intent of applicable codes and
standards. Works with other divisions of the Inspection Department in
developing new standards or improving or updating existing standards, as
required. Reviews/evaluates contractors' quality assurance/quality control
systems, as necessary. Able to investigate technical problems and conduct
root cause analysis. Provides inspection coverage and technical assistance
for disasters and emergencies on a 24 hours-a-day, 7 days-a-week basis in
assigned areas. Able to make quick decisions during the emergencies of any
required repairs. SELECTION CRITERIA: BS Mechanical Engineering with 8 years of
practical inspection experience. Hold NDT level II certification in PT, MT
and Film interpretation. Hold at least three international body
certifications (API's, AWS, NACE). Willingness to learn and capture knowledge
and experience. Strong personal skills in term of team work and
communications. COMMENTS: Yanbu Refinery Department's mission is to meet the
Western Region market's demand for high quality refined products. Refinery
Inspection Engineers
O03-70011690J,O03-70011690L,O03-70011690C,O03-70011690N POSITION DESCRIPTION: The successful candidate is expected to:
Performs applicable duties required of an Sr. Inspector Engineering within
the assigned inspection discipline and certification limitations. Trains
personnel to develop technical ability and understanding of applicable codes,
standards, inspection methods in various disciplines and NDT methods. Trains
personnel in the proper use of new or existing inspection equipment tools,
techniques, methods and standards and acts as mentor. Performs inspections of
an advanced, more complex nature in addition to providing day-to-day work
direction, as required, for the inspection of new, existing, or vendors
facilities assuring that materials are correct for the intended service and
work performed conforms to engineering specifications and/or Saudi Aramco
standards. Reviews: 1) Design Drawings and engineering specifications
assuring that all applicable Saudi Aramco standards have been applied, 2)
Waiver requests to assure they accurately represent the conditions described,
3) New and proposed standards for outdated, conflicting, ambiguous, or incorrect
information 4) QA/QC programs for compliance. Writes and/or reviews
inspection reports, pre & post T&I reports, worksheets,
non-compliance reports and verifies logbook entries of on-site inspection
findings, ensures all hard copy and electronic databases are initiated and
maintained. Performs quality assurance assessments at vendor plants, as
directed. Continues; personal professional development by attending courses,
seminars etc. Reviews and monitors quality control programs developed by
construction contractors. Performs other miscellaneous related duties as
requested by the applicable Supervisor. SELECTION CRITERIA: Each candidate should be fully qualified and
experienced in Refinery Inspection Work, and is expected to work
independently in inspection and maintenance procedures. Coordinate, plan,
schedule day-to-day work directions on existing facilities, assuring that
reports and records are properly maintained and materials are proper for the
intended services and work performed conforms to engineering specifications.
Must be qualified to the requirements of the National Board of Boiler &
Pressure Vessel Inspection Codes or holds current certifications in both API
510 and 570. Must meet the requirements for certification to ASNT SNT TC-1A1
Level II or equivalent in liquid penetrant, magnetic particles, and U/T
examinations and possess CWI certification form AWS. Must demonstrate a
thorough knowledge of ASME, ANSI and API codes and standards. Non degreed
candidates: must have a minimum of 12 years of refineries inspection
experience. Degreed candidates: Must have a minimum of 5 years of inspection
experience in refineries or similar facilities. MINIMUM REQUIREMENTS: EDUCATION: B.S. in Engineering EXPERIENCE:
Five years of professional experience, preferably in the oil or similar
process industry, including at least two (2) years as Saudi Aramco Inspector
Engineering or four (4) years of direct inspection experience. -OR Completion
of ITC: English, ERW; Math, MT; Science, ST. Experience required: Thirteen
(13) years minimum. Must have 2 years experience as Saudi Aramco Inspector
Engineering or 13 years industrial experience including 10 years inspection
experience in the assigned discipline. A thorough knowledge of English is
required to perform work as described and make clear and concise verbal and
written reports and keep up with technical advancements. Must read, write and
speak English fluently. Must have good vision (20/20 normal or corrected) and
be in good physical condition. Must be willing to work at high elevations and
in confined spaces. Must be willing to work in assigned areas. Must be
computer literate with competence in Microsoft Office products (i.e. MS Word,
Excel and PowerPoint). Refinery
Linear Programs Modeling Engineer U01-70010081 POSITION DESCRIPTION: Specific Requirements: Candidate should be
a Refinery Linear Programs Modeling Engineer who can review the current
models on monthly basis and evaluate, based on refinery back casting, the
required modifications. Should have a bachelor degree in Chemical or
Industrial/System Engineering with 7 years of experience in refinery
modeling. General Requirements: Prepare approvals of the problem solving
report plans, schedules and provides coordination and work direction as required
for the preparation of designs, processes, reports, correspondence and
related data and assures the efficiency, adequacy and conformance to overall
objectives of project. Formulates the basis for an engineering study or
project or design in any basic or special engineering field by analyzing and
evaluating all data pertinent to assignment. Evaluates data as to scope,
effect on existing installation, economic value, long range planning and
budgetary considerations. Leads and recommends new continuous improvement
solutions for installations or modifications to improve existing facilities
and standardization within specific fields of endeavor. Estimates costs,
prepares justifications and completes expenditure requests as required
Support project execution and project proposals and initiates detailed work
outline and makes decision as to basic processes, and/or equipment. Performs
work and or delegates work to other engineers and final development of
specialized or technical proposals and studies of proposed projects.
Discusses, coordinates and resolves problems with personnel throughout Aramco
and subsidiaries and with outside of Company organizations. Acts as technical
consultant when required. Reviews work of engineers directed. Checks that
reports are written according to established methods of good report
presentation. Makes recommendations for future study or report changes.
Approves reports for transmittal to supervisor. Reviews work of third party,
technology reports, and engineering standards. Lead the implementation and
operation of all kind of recommended solutions. SELECTION CRITERIA: Candidate should be a Refinery Linear
Programs Modeling Engineer who can review the current models on monthly basis
and evaluate, based on refinery back casting, the required modifications.
Should have a bachelor degree in Chemical or Industrial/System Engineering
with 7 years of experience in refinery modeling. Also, he should pass an
interview with Oil Supply Planning & Scheduling Department. Refinery
Maintenance Engineers (Reliability)
A65-70010319C,A65-70010319B,A65-70010319A POSITION DESCRIPTION: Candidate will work as a senior
reliability coordinator in the Reliability Unit in Ras Tanura Refinery. The
candidate will be responsible for assessing the refinery equipment and work
processes reliability and monitoring the implementation of all reliability
improvement plans. In addition, he will have the following duties: Provides
technical guidance for reliability & maintenance data by assessing SAP
data history for accuracy and compliance with reliability best practices.
Identifies reliability data collection processes to sustain KPI's
consistency. Endures that equipment are performing effectively and
efficiently (current vs. design speed and capacity). Establishes and monitors
programs for critical equipment analysis and condition monitoring.
Establishes, in conjunction with maintenance engineers, maintenance programs
for critical equipment. Lead teams to handles and finds solution to equipment
chronicle problems. Serves as the focal point for monitoring KPI's for
maintenance and operation management teams. Assists in new installations
design and any design changes within the facility. Coordinates closely with
counterpart in-house organization (production engineers and planners, design
engineers, etc.). Analyzes equipment operating data and evaluates equipment
overall effectiveness. Reviews yearly business plan with planners &
engineers to identify T&I hours requirements. Evaluates plant and
equipment unscheduled downtime proportions. Identifies reliability
improvement opportunities. Develops reliability strategies to monitor plants
equipment performance according to business targets Links plants high level
performance picture to maintenance performance and equipment performance
(downtime and performance breakdown structure). Promotes and sustains
reliability and maintenance program integration. Promotes reliability best
practices integration to plant operations. Promotes and implements
reliability & maintenance projects (TPM, RCM, CBM, ODR etc). Develops
metrics for quality assessment and control. Develops and calculates
reliability metrics (MTBF, MTTR, failure rate, etc.). Coordinates identifying
plant critical assets according to production targets. Updates equipment criticality
list according to production business plan changes and targets. Coordinates
critical spare parts reviews. Develops proactive RCA and FMECA analysis for
critical equipment. Leads and facilitates failure investigation for critical
equipment, generates reports, actions logs and follow-up in their closure.
Monitors worldwide reliability and maintenance best practices concepts,
techniques and tools (magazines, conferences, books, etc.). Develops learning
logs from critical failures investigation and implements them for other
equipment. Generates monthly bad actors report and follows-up in gap closure.
Organizes reliability day to promote reliability practices, benefit and
results. Performs cost/benefits analysis for technical solutions. SELECTION CRITERIA: BS Mechanical Engineering. Minimum of 10
years experience working in a refinery or petrochemical plant as Mechanical
Engineer. Worked as reliability engineer or turnaround engineer. Led or
participated in failure investigation team for mechanical system. Refinery
Maintenance Engineer (Turnaround - T&I) A65-70011191 POSITION DESCRIPTION: Candidate will be working as a senior
T&I (Turnaround & Inspection) engineer in the T&I unit in Ras
Tanura Refinery. The candidate will be responsible for effective preparation
and execution of major plants T&I. In addition, incumbent will have the
following duties: Attend T&I scope of work meetings and provide
suggestions to challenge it. Provide data from past T&I, success or
shortcomings, during the planning phase of the T&I to ensure effective
T&I execution. Review all T&I packages for completeness and
availability of all required data for correct execution. Initiate and monitor
the progress of all contracts procurement. Review all required materials for
the T&I and monitor their procurement. Assess the required budget. Chair
progress review meetings for T&I preparation with all concerned parties.
Develop T&I execution organization chart and review manpower requirement
for the execution. Develop roles and responsibilities for all personnel
involved in the T&I. Review all the logistics requirement including,
transportations, radio utilization, offices and communications and progress
update. Develop detailed T&I task list and convert it into PREMIVERA.
Assess T&I duration and determine critical path. Ensure all required
technical information is available and handy. Participate in T&I
execution and chair meetings for T&I progress. Provide technical
assistance and provide solutions to mitigate any holdups. Develop action plans
to mitigate any new T&I discovery and share them with all concerned
parties. Monitor T&I execution and list any recommendations for future
improvement. Witness commissioning of the plant after T&I completion.
Develop summary of lesson learnt during the T&I and review them with all
concerned parties during the T&I critique meeting. Issue the critique
meeting minutes and monitor implementation of its recommendations. SELECTION CRITERIA: BS Mechanical Engineering. Minimum of 10
years of experience in Refining and Petrochemical, preferably in a
hydrocracker plant. Worked as T&I engineer. Successful completion of
project handling and T&I planning courses. Rich knowledge about various
plant equipment maintenance and inspection requirements. Refinery
Maintenance Planner A65-70010313 POSITION DESCRIPTION: Candidate will be assigned as Maintenance
Planner in Ras Tanura Refinery will have the following duties: Receives, logs
and processes all work orders, ensuring conformance with the latest revision
of G.I. 1000.500, Maintenance Work Order. Prepares detailed job step plans in
proper execution sequence, with details of craft man-hour and crew size
requirements for each step. Utilizes extensive knowledge of craft skills and
knowledge of the equipment involved and places job steps in the proper
sequence to ensure efficient completion of work to meet operational
requirements. Visits job sites when necessary to determine special job
requirements. Oversees AMMS activities in the assigned area providing work
direction to AMMS Operators as necessary. Identifies all materials, tools,
equipment, and special preparations required for each job step. Possesses a
good working knowledge of the AMMS system and the Aramco Materials System
(AMS), including use of the AMS Catalog, requisitioning of AMS stock items,
requisitioning of Direct Charge Materials, use of surplus materials, and
procedures for returning surplus and excess materials to the Storehouse.
Provides the foremen with a completed package for successful execution of maintenance
work at minimum cost. Ensures that materials are on-site prior to scheduling
the job. Ensures that surplus and excess materials are returned to the proper
materials handling personnel for eventual return to the Storehouse. Arranges
for and schedules support service equipment, to coincide with the work order
scheduling. Participates in the Weekly/Schedule Coordination Meeting and
presents the Weekly Schedule of workable maintenance jobs from the backlog.
Ensures that a clear understanding exists of which jobs will be worked in the
upcoming week. Finalizes the Weekly Schedule for Operations approval.
Prepares daily schedules from the approved Weekly Schedule, per Aramco G.I.
1020. Coordinates daily schedules with Maintenance Foremen, Supervisor and Operations
Foremen and ensures that a complete planning package is attached to the work
order. Maintains work order and equipment history files and is responsible
for checking and ensures data is entered. Ensures accuracy of all Provides
maintenance performance monitoring data for his assigned area, segment, unit
or division (depending on the organizational pattern and assignment).
Prepares Whole Job Standards and reviews the log of existing Whole Job
Standards for potential application to current work. Maximizes the use of
those existing Whole Job Standards to perform planning efficiently. SELECTION CRITERIA: 11 years varied craft experience (experience
in more than one major craft is desirable) inclusive of training. Prior craft
supervisory experience is desirable. Should have a familiarity of Critical
Path Scheduling. Incumbent must possess prior experience with the use of
computerized maintenance planning, scheduling and performance monitoring
programs. Refinery
Mechanical Engineers O03-70008820B, O03-70008820E, O03-70008820D, O03-70008820C,
O04-70009930B POSITION DESCRIPTION: The Engineer will be required to support
the Refinery in the field of mechanical fixed equipments covering all aspects
from conceptual design, through detailed engineering, day-to-day activities,
and long-term performance improvements. The successful candidate is expected
to: Perform/review and endorse all hot tap calculations. Prepare, review, and
approve datasheets for all mechanical fixed equipment (including but not
limited to heat exchangers, furnaces, and pressure vessels..etc), datasheet
and Safety Instruction Sheets. Prepare piping construction drawings with
Layout Group including valve datasheets. Review mechanical design packages on
all expense and capital projects. Perform piping stress calculations in
accordance with B31.1, B31.3, B31.4 and B31.8. Provide piping supports
evaluation on all field piping changes. Evaluate valve repair,
reconditioning, and casting defects problems. Perform tank modifications and
evaluations in accordance with Saudi Aramco standards and API codes. Perform
furnace tube strength calculations in accordance with API codes. Carry out
ASME Section 8 Division 1 and Division 2 analysis for fixed equipment.
Perform fitness for service on all fixed equipment, piping systems, and
pipelines in accordance with API standards. Perform vibration analysis
(steady state, transient, vortex shedding, slug, water hammer). SELECTION CRITERIA: BS Mechanical Engineering. Minimum of 10
years experiences in mechanical fixed equipments related to refinery, oil and
gas industry. Basic knowledge in refinery chemical processes. Excellent
communication skills in oral and written English. Must have participated in
project commissioning, field problems troubleshooting in oil and gas related
industries. Must have a thorough knowledge of engineering practices,
international standards, and economic principles related to incumbent's
field. Refinery
Planning & Program Analyst O04-70009930B POSITION DESCRIPTION: The successful candidate is expected to:
Coordinates the preparation of routine or special reports for department
management review and approval. Works with corporate group in maintaining the
flow of business information to assist Department Head/Division Heads in
keeping operations, manpower, and financial budgets within established
programs and standards. Conducts studies relating to technical or business
analysis-productivity and effective utilization of funds and resources or
other areas of concern. Develops cost control measures required to meet
cost/schedule/program objectives. Provides and records operations performance
data with particular emphasis on portrayal of trends. Conducts special
studies as assigned. Provides for the development and maintenance of
statistical reports, visual presentations and others for management purposes.
Solves problems and handles other matters such as those related to
operations, personnel administration, and emergency needs as assigned.
Directs the work of subordinates as applicable. Handles contract work such as
auditing invoices from contractors, interpreting contract provisions,
checking correctness or arranging corrections; monitors contractor
performance for compliance or provides assistance and support in procurement.
SELECTION CRITERIA: Bachelor's Degree in Business
Administration, Accounting, or Financial Management. 8 years' experience in
cost control, budgets, or related activities. Excellent command of oral and
written English Thorough working knowledge of operating area of assigned
department. Must have ability to perform statistical and problem analyses
while working under time constraints, and have working knowledge of
applicable EDP systems and programs. Refinery
Process Control Engineer
O03-70008821C POSITION DESCRIPTION: The Engineer will be required to support
the Refinery in the field of Instrumentation engineering covering all aspects
from conceptual design, through detailed engineering, day-to-day activities,
and long-term performance improvements. The successful candidate is expected to: Prepare comprehensive
instrumentation design packages. Troubleshoot field instrumentation related
field problems. Investigate plant and equipment trips and provide remedial
engineering recommendations. Prepare conceptual design packages and
engineering budgetary cost estimates. Provide technical support to
maintenance and operation with regards to instrumentations, DCS, and
auxiliary control systems like PLC's and Compressor control systems.
Recommend modifications to improve the performance of field instrumentations
and process control. Size control valves, orifice plates, and relief valves
using certified sizing software. Communicate with equipments vendors and
technical consultants to resolve complex issues concerning new technology and
upgrades of equipments. Review company engineering standards and participate
in standards reviews committees. Support and troubleshoot on-line analyzers
and their associated sampling systems. SELECTION CRITERIA: BS Chemical/Electrical or Systems
Engineering. Minimum of 10 years experiences in process control field related
to refinery, oil and gas industry. Basic knowledge in refinery chemical
processes. Excellent communication skills in oral and written English. Must
have participated in project commissioning, field problems troubleshooting in
oil and gas related industries. Must have a thorough knowledge of engineering
practices, international standards, and economic principles related to
incumbent's field. Refinery
Rotating Equipment Engineer A62-70008765 POSITION DESCRIPTION: An Engineer skilled in the dynamic
vibration discipline to work in a complex oil refinery dealing with all types
of rotating equipment. The responsibilities of this position are: Mentor
effectively Saudi technicians and engineers to be professional in vibration
measurement, analysis and troubleshooting. This will be done by setting a two
year plan with a monthly follow up. Evaluate the existing vibration
monitoring program in RRD, and initiate an action plan for future
improvement. Assist the vibration technicians with day to day
troubleshooting. Assisting the compressor engineers with monitoring the
refinery critical compressors equipped with on line monitoring, and issuing a
monthly report showing the compressor dynamic condition, through principally
Bentley system 1 and SKF data collection. Perform reliability studies and
benchmarking for rotating equipment. Study and evaluate the feasibility of
installing vibration continuous monitoring on some critical equipment, and
evaluating future requirements for ensuring nuisance trip avoidance. To lead
a group of 4 vibration technicians and insure the quality of their work. To
make a routine evaluation for the vibration technicians and engineer in order
to evaluate their progress. Initiate in our corporate SAP system a predictive
maintenance based approach. SELECTION CRITERIA: The applicant should hold at least a B.S.
degree in mechanical engineering with minimum 10 years of experience in the
field of rotating equipment. Candidate should have worked at least 8 years in
the field of vibration, dynamic analysis, and predictive maintenance. The
applicant should be fluent in English presentation. Should be familiar with
windows applications as well as other common software. Candidate should
possess excellent interpersonal skills. The applicant who is a certified
professional in the machinery and asset vibration specialty is preferred. COMMENTS: Riyadh Refinery is a hydrocarbon producing facility
based in Riyadh the capital of KSA. It is one of five Saudi Aramco refineries
within the Kingdom. Riyadh refinery produces gasoline, diesel, jet fuel,
asphalt, naptha, hydrogen, utilities for the domestic central region of KSA
through production plants arranged in a complex format utilizing Hydrogen,
nitrogen, amine, diesel hydrotreater, platformer, hydrocracker, crude and
stabilization plants. The candidate will join a progressive, enthusiastic
Refinery Department which is aggressively pursuing production Key Performance
Indicators. Accurate, reliable equipment vibration analysis will reduce
maintenance expenditure and provide a solid base for predictive maintenance.
The candidate will be part of this vibrant team striving to achieve
professional satisfaction with the resultant increased plant margin
contribution. The candidate will be expected also to conduct in house
training to further the vibration technicians and Reliability Engineers
familiarity with specific data collection through the DLX 2500 collection
data logger using traducer packs and showing the corrective translations for
high and low frequency indicators. Accelerometers. Analysis techniques should
include: internal geometry, frequency calculations, applied harmonics
familiarity with bearing failures, transducer selection, data collection,
processing the data and diagnosing the problem.
Oil Supply Specialist
X07-70004808 Saudi: US Base $130/200K Updated November 23, 2009 Drilling Supervisor F35-70010363
Saudi
Arabia NEED ASAP Should net to $200K/yr
including OT Will live in Saudi but work 14 days on/7 days off, get base, uplift, site
allowance & overtime.
DUTIES/RESPONSIBILITIES: Will serve as the primary liaison
between Saudi Aramco and Contractor and will provide supervision of all
operations performed on Saudi Aramco Wells. Provide training and evaluation of
Saudi Aramco Saudi Arab Liaisonmen/Toolpusher trainees. Make recommendations
on alternative methods of equipment when unusual situations are encountered
and will coordinate timely deliveries of Saudi Aramco and Service Company
materials and equipment to the well as required. Ensure that the contractor
meets all requirements of the contract and will verify and approve all the
contractor and service company operations by way of tour reports and field
tickets. Will ensure that the contractor maintains the rig and equipment
adequately to maximize efficiency and minimize down time, and that Saudi
Aramco materials and equipment are properly utilized, handled and stored.
Will ensure that all Saudi Aramco Safety rules and Regulations are followed
and will work with drilling and work over engineers to see that modern
practices are followed. Work closely with Drilling and Work over Services
Department personnel as required to accomplish objectives and perform other
miscellaneous duties as directed by the drilling superintendent. Ensures that
Saudi Aramco Blowout Prevention Standards are met in all respects including
equipment configuration, testing , certification and crew response. Assures
that rig and personnel comply with Saudi Aramco established safety standards
and procedures. Promotes environmental protection and ensures that company
environmental protection policies are implemented. Provides timely advice to
Liaisonman DWO on well control issues and ensures accepted industry practices
and Saudi Aramco established safety standards and procedures are implemented.
Promotes cost saving ideas and awareness with the view toward operational
optimization consistent with safety meeting well objectives. Conducts
quarterly safety inspections and rig evaluations. Have the flexibility to
move between rigs as drilling operations and rig coverage dictates. Click
Here to Apply REFINERY PLANNING ENGINEER U01-70010036B
(URGENT) Refinery Business Development Specialist
F30-70006278 Saudi: Base $140/240K +o'seas pkg, tax
protected, savings & super retirement progs. Family status, career
jobs. Mandatory retirement @ 60: want cand w/ 10 yrs left to
work Updated September 15, 2009 $80000 - $120000 Saudi Arabia, Saudi
Arabia Asia; [3 positions open] Position
Numbers: L19-70008903 L30-70005872 L30-70002942
Position
Description: Responsibilities include sizing specifying communication system
such as data, telephone, wireless, transmission and facilities. Be involved
with CAD MicroStation and Network Engineer (for copper and fiber cable
systems) development, installation details, schematics, one-lines, network
diagrams, input/output schedules and other drawings. In addition be involved
with. Developing communication network strategies, wiring proposal,
functional and detailed design specifications. Prepare conceptual design
packages and engineering budgetary cost estimates. Responsibilities include
providing technical services to Maintenance and Operations Divisions with
regard to communication systems, assess plant facilities & process arrangements,
and recommending new installations or modifications to improve plant control
performance or replacement of defective or communication systems. Serve in
technical lead role on communication systems implementations. Review design
drawing and engineering specifications to produce review comments and perform
quality assurance assessments. Communicate with equipment vendors and
technical consultants to resolve complex issues concerning new technology,
upgrade of equipment, revision to standards and purchase specifications, test
procedure and new projects designs. Provide mentoring and transfer knowledge,
skills and experience to entry level engineers and designers. Selection
Criteria: Education: BS Engineering. Experience: Positions requires seven+
& ten+ years min. exp. in ; the oil or similar process industry;
construction or associated engineering fields. Language Requirements: A
Knowledge of the Arabic language desirable but not required. Other: A well
rounded knowledge of project management, cost control and cost estimating.
Must be completely familiar with US building, Utility and piping codes. Must
be familiar with Budgeting and Accounting procedures. Should be well informed
on Standard Safety practices. Click
Here to Apply Updated September 14, 2009 Instrumentation Engineers L06-70008126, L30-70001855, E03-70012915 $85000
- 150000 POSITION DESCRIPTION: Successful candidate
will be expected to: Have Experience with design and construction of Oil
& Gas Facilities and related Projects. Plan, schedule and provide work
direction as required for preparation designs, possess reports, correspondence
and related data and assurance the efficiency, adequacy and conformance of
overall objectives of all phases of very complex engineering problems.
Formulate the dosing basis by collecting, analyzing information and date
relative to operating requirements, process economic considerations and such
other pertinent factors as may be involved as a preliminary step in support
of proposals for new construction modification or maintenance to equipment.
Study mechanical modification to gas processing, gas handing and utility
facilities. Occasionally called upon to design mechanical aspects of new
faculties as requested. Participate in construction activities,
pre-commissioning, commissioning and function test activities for the new
projects. Follow and inspect the construction progress of assigned projects
assuring conformance with design specifications, codes and standard,
recommend or confirm design changes material and equipment substitutes.
Review design packages. Interface with the Project Management Teams (PMT)
Consulting Services & Inspection Departments, capital project
contractors, equipment manufactures and Saudi Aramco proponents. Perform a
variety of related work such as initiating reports, correspondence and faxes
relative to assigned projects , assembling performance date and conduction
studies relative to the development procumbent or adaptation of equipment ,
interpreting the mining and application of codes and standards , reviewing
operating procedures and safety instruction , acting and safety instructions,
acting as technical consultant on operating problems. Assist other engineers
in the solution of problems outside their specialty. MINIMUM REQUIREMENTS: Education: B.S.
Engineering. Experience: Ten (10) years, preferably in the oil
industry or similar process industry, such that the incumbent is clearly
recognized as an expert. Must have a thorough knowledge of engineering
practices and economic principles, calculation methods, design details, U.S.
& Int'l Codes, Standards and Specifications. Click
Here to Apply DCS Engineers L22-70006035,
L22-70006033 $85000 - 150000 MINIMUM REQUIREMENTS: Education: BS
Engineering. Experience: Position requires ten (10) years experience in
construction or associated engineering fields, preferably in the oil
industry or similar process industry. Language Requirements: A
Knowledge of the Arabic language desirable but not required. Other: (1) A
well rounded knowledge of project management, cost control and cost
estimating. (2) Must be completely familiar with building, utility and piping
codes, (3) should be well informed on Standard Safety practices. DUTIES/RESPONSIBILITIES: Successful
candidate will be expected to: Plans, schedules and provides work direction
as required for preparation of designs, processes, reports, correspondence
and related data and assures the efficiency, adequacy and conformance to
overall objectives of alt phases of very complex engineering problems.
Support the development and formulates the basis fore engineering studies in
any several basic or special engineering fields by analyzing and evaluating
all data pertinent to problems. Evaluates data as to scope, effect on
existing installations, economic value, long rang planning and budgetary
considerations. Leads the activists of project proposal that include
development of scope, functions, interrelationship, integration, physical
solution definition, cost estimate, etc. Leads project execution for project
proposal, initiative, studies and continuous improvement of solutions and
problem solvers. Initiates detailed work outline and makes decision as basic
approaches, processes and / or equipment. Performs work and / or delegates
work to other engineers for final development of specialized or technical
proposals and proposed projects. Brings all elements of projects together,
makes certain that all elements proceed satisfactory on schedule and within
the money allowed and initiates corrective action as required. Reviews cost
estimates, recommendation from vendors, consultants, and licensors.
Discusses, coordinates and resoles problems with personnel throughout Aramco
and subsidiaries and with outside of company organizations. Acts as technical
consultant when required. Recommends new installations or modifications to
improve existing facilities and standardization within broad field of
endeavor. Estimates costs, prepares justifications and completes expenditure
requests as required. Reviews work of engineers directed. Checks that reports
are written according to established methods of good report presentation.
Takes recommendations for further study or report change. Approves report for
transmittal to supervisor. Develop scope and description of technology items,
and leads the implementation and operation of developed solutions in the
field. Click
Here to Apply
CONTRACTS ADVISORS L30-70004468, L16-70004824,
L22-70006037, L03-70005196, L19-70005057, L06-70004751, L16- 85000 – 135000 7 positions open] CONTRACTS ADVISORS Saudi:
Base $85/150K +o'seas
pkg, tax protected, savings & super retirement progs. Family status,
career jobs. American or Canadian citizens!! MINIMUM REQUIREMENTS: EDUCATION: BS in a
Business or Engineering discipline. MBA is desirable. EXPERIENCE: (10) years
experience in the petroleum or related industries with related
experience in operational area. A minimum of 3 years of progressively
responsible work or contact with auditing, accounting and contracting
techniques and procedures is desirable. A high level of fluency in oral &
written English is essential. Ability to motivate subordinate professional
people and to communicate both orally in writing with professional level
people in other fields and senior and executive management both within and
outside the Company. DUTIES/RESPONSIBILITIES: Performs all
functions common to the work Director Level as established by Management.
Provides complex technical advice and support to contract proponents form the
conception of contract service requirements through the execution of a
contract to the termination of the contract or service requirements. Directs
and participates in the development of engineering and financial studies that
establish feasibilities for contract services and evaluation for alternatives
that may be technical, financial and/or procedural/administrative. Coordinate
and/or participates in the development of a professional level of analysis of
company risk or exposure. Coordinate and/or participates in the development
of a professional level of analysis and technical qualification of bidders.
Coordinates and/or participates in the development if scopes of work for various
contract services. Develops professional-level presentations to Executive
management and makes presentations or participates in the presentation to
Services Review committee. Participates as the contract proponent
representative or delegates participation on the Bid Review Team charges with
development of a realistic company position on contract term and the
negotiation of these terms. Participates as the contract proponent
representative in a professional analysis of bid response and negotiation offers
and preparation of counter offers. Negotiates with contractors as part of a
negotiating team comprised of Contracting and contract proponent
representatives. Coordinates or participates in the preparation of responses
to contract claims and represent the proponent on claims review panels.
Coordinates pr participates in the verification of contractor costs and the
preparation of the cost escalation of de-escalation amendments. Provides
proponent representations in the administration of contracts and works with
finance, law and contracting in the development of financial and legal advice
on intent of wordings, scopes of services of others clauses that may impact
quality of service, cost of services and cost benefit relationships.
Recommends changes on contracting procedures or contract format for
presentation to the contracting Department, comments to finance and senior
management's controls to prevent abuses, conflicts or excessive company
risk/exposure. Perform miscellaneous related duties as requested. Click
Here to Apply Updated September 11, 2009 Mechanical Engineer L19-70005051 MINIMUM
REQUIREMENTS: Education: BS Engineering. Experience: Position requires ten (10)
years experience in construction or associated engineering fields. Language
Requirements: A Knowledge of the Arabic language desirable but not required.
Other: (1) A well rounded knowledge of project management, cost control and
cost estimating, (2) Must be completely familiar with Aramco building,
Utility and piping codes, (3) Must be familiar with Aramco Budgeting and
Accounting procedures, (4) should be well informed on Standard Safety
practices. DUTIES/RESPONSIBILITIES:
Successful candidate will be expected to: Experience with design +
construction of Oil & Gas Facilities and related Projects. Plan, schedule
and provide work direction as required for preparation designs, reports,
correspondence and related data and assurance the efficiency, adequacy and
conformance of overall objectives of all phases of very complex engineering
problems. Formulate the dosing basis by collecting, analyzing information and
date relative to operating requirements, process economic considerations and
such other pertinent factors as may be involved as a preliminary step in
support of proposals for new construction modification or maintenance to
equipment. Design or study mechanical modification to gas processing, gas
handling and utility facilities. Occasionally called upon to design
mechanical aspects of new faculties of the type mentioned. Participate in
construction activities, pre-commissioning, commissioning and function test
activities for the new projects. Follow and inspect the construction progress
of assigned projects assuring conformance with design specifications, codes
and standard, recommend or confirm design changes material and equipment
substitutes. Review design packages and capital projects. Interface with the
project Management Teams (PMT) Consulting Services & Inspection
Departments, capital project contractors, equipment manufactures and Saudi
Aramco proponents. Perform a variety of related work such as initiating
reports , correspondence and faxes relative to assigned projects , assembling
performance date and conduction studies relative to the development
procumbent or adaptation of equipment, interpreting the mining and
application of codes and standards, reviewing operating procedures and safety
instruction, acting and safety instructions, acting as technical consultant
on operating problems. Assist other engineers in the solution of problems
outside their specialty. Click
Here to Apply Mechanical Engineer L30-70005915 MINIMUM REQUIREMENTS: EDUCATION: B.S. in Engineering. EXPERIENCE: Seven (7) years in the oil industry or similar process industry. Experience must be such that the incumbent is clearly recognized as being capable of project and design assignments. A thorough knowledge of English is required to perform analyses and studies in depth, make professional presentations and keep up with technical advancements; Arabic not required but considered desirable for American incumbents in this position. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Aramco Codes, Standards and Specifications. Experience with design and construction of Oil & Gas Facilities and related Projects. .
The successful candidate will be expected to: Plan, schedule and provide work
direction as required for preparation designs, reports, correspondence and
related data and assurance the efficiency, adequacy and conformance of
overall objectives of all phases of very complex engineering problems.
Formulate the dosing basis by collecting, analyzing information and date
relative to operating requirements, process economic considerations and such
other pertinent factors as may be involved as a preliminary step in support
of proposals for new construction modification or maintenance to equipment.
Design or study mechanical modification to gas processing, gas handing and
utility facilities. Occasionally called upon to design mechanical aspects of
new faculties of the type mentioned . Participate in construction activities,
pre-commissioning, commissioning and function test activities for the new
projects. Study mechanical modification, follow and inspect the construction
progress of assigned projects assuring conformance with design
specifications, codes and standard, recommend or confirm design changes
material and equipment substitutes. Review design packages and capital
projects. Interface with the project Management Teams (PMT) Consulting
Services & Inspection Departments, capital project contractors, equipment
manufacturers and Saudi Aramco proponents. Perform a variety of related work
such as initiating reports, correspondence and faxes relative to assigned
projects, assembling performance date and conduction studies relative to the
development procumbent or adaptation of equipment , interpreting the mining
and application of codes and standards , reviewing operating procedures and
safety instruction, acting and safety instructions, acting as technical
consultant on operating problems. Assist other engineers in the solution of
problems outside their specialty. Click
Here to Apply Mechanical Engineer L30-7000579 MINIMUM
REQUIREMENTS: EDUCATION: B.S. Engineering. EXPERIENCE: Experience: Position
requires Seven (7) years experience in construction or associated engineering
fields. Language Requirements: A Knowledge of the Arabic language desirable
but not required. Other: (1) A well rounded knowledge of project management,
cost control and cost estimating, (2) Must be completely familiar with Aramco
building, Utility and piping codes, (3) Must be familiar with Aramco
Budgeting and Accounting procedures DUTIES/RESPONSIBILITIES:
Successful candidate will be expected to: Experience with design +
construction of Oil & Gas Facilities and related Projects. Plan, schedule
and provide work direction as required for preparation designs, possess,
reports, correspondence and related data and assurance the efficiency,
adequacy and conformance of overall objectives of all phases of very complex
engineering problems. Formulate the dosing basis by collecting, analyzing
information and date relative to operating requirements, process economic
considerations and such other pertinent factors as may be involved as a
preliminary step in support of proposals for new construction modification or
maintenance to equipment. Design or study mechanical modification to gas
processing, gas handing and utility facilities , Occasionally called upon to
design mechanical aspects of new faculties of the type mentioned .
Participate in construction activities, pre-commissioning, commissioning and
function test activities for the new projects. Follow and inspect the
construction progress of assigned projects assuring conformance with design
specifications, codes and standard, recommend or confirm design changes
material and equipment substitutes. Review design packages and capital
projects. Interface with the project Management Teams (PMT) Consulting
Services & Inspection Departments, capital project contractors, equipment
manufactures and Saudi Aramco proponents. Perform a variety of related work
such as initiating reports, correspondence and faxes relative to assigned
projects , assembling performance date and conduction studies relative to the
development procumbent or adaptation of equipment , interpreting the mining
and application of codes and standards, reviewing operating procedures and
safety instruction, acting and safety instructions, acting as technical
consultant on operating problems. Assist other engineers in the solution of
problems outside their specialty. Click
Here to Apply Mechanical Engineer L06-70008011,
L03-70004775 MINIMUM REQUIREMENTS: EDUCATION: B.S. Mechanical Engineering. EXPERIENCE: Nine (9) years, preferably in the oil industry or similar process industry, such that the incumbent is clearly recognized as an expert. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. Codes, Standards and Specifications. DUTIES/RESPONSIBILITIES:
Plans, schedules and provides work direction as required for preparation of
designs, processes, reports, correspondence and related data and assures the
efficiency, adequacy and conformance to overall objectives of alt phases of
very complex engineering problems. Support the development and formulates the
basis for engineering studies in any of several basic or special engineering
fields by analyzing and evaluating all data pertinent to problems. Evaluates
data as to scope, effect on existing installations, economic value, long
range planning and budgetary considerations. Leads the activists of project
proposal that include development of scope, functions, interrelationship,
integration, physical solution definition, cost estimate, etc. Leads project
execution for project proposal, initiatives, studies and continuous
improvement of solutions and problem solvers. Initiates detailed work outline
and makes decision as to basic approaches, processes and/or equipment.
Performs work and/or delegates work to other engineers for final development
of specialized or technical proposals and proposed projects. Brings all
elements of a project together, makes certain that all elements proceed
satisfactorily on schedule and within the money allowed; and initiates
corrective action as required. Reviews cost estimates, recommendation from
vendors, consultants, and licensors. Discusses, coordinates and resolves
problems with personnel throughout Aramco and subsidiaries and with outside
of company organizations. Acts as technical consultant when required.
Recommends new installations or modifications to improve existing facilities
and standardization within broad fields of endeavor. Estimates costs,
prepares justifications and completes expenditure requests as required.
Reviews work of engineers directed. Checks that reports are written according
to established methods of good report presentation. Takes recommendations for
further study or report changes. Approves reports for transmittal to
supervisor. Has working knowledge of Saudi Aramco Standards and
Specifications to review and provides consultation to proponent and project
representatives related to their interpretation/ application of the standards
in area of expertise. Develop scope and description of technology items, and
leads the implementation and operation of developed solutions in the
field. Click
Here to Apply Mechanical Engineer E03-70012912 POSITION DESCRIPTION: Successful candidate will be expected to: Have Experience with design and construction of Oil & Gas Facilities and related Projects. Plan, schedule and provide work direction as required for preparation designs, possess, reports, correspondence and related data and assurance the efficiency, adequacy and conformance of overall objectives of all phases of very complex engineering problems. Formulate the dosing basis by collecting, analyzing information and date relative to operating requirements, process economic considerations and such other pertinent factors as may be involved as a preliminary step in support of proposals for new construction modification or maintenance to equipment. Study mechanical modification to gas processing, gas handing and utility facilities. Occasionally called upon to design mechanical aspects of new faculties as requested. Participate in construction activities, pre-commissioning, commissioning and function test activities for the new projects. Study mechanical modification. Follow and inspect the construction progress of assigned projects assuring conformance with design specifications, codes and standard, recommend or confirm design changes material and equipment substitutes. Review design packages. Interface with the Project Management Teams (PMT) Consulting Services & Inspection Departments, capital project contractors, equipment manufactures and Saudi Aramco proponents. Perform a variety of related work such as initiating reports, correspondence and faxes relative to assigned projects, assembling performance date and conduction studies relative to the development procumbent or adaptation of equipment , interpreting the mining and application of codes and standards, reviewing operating procedures and safety instruction, acting and safety instructions, acting as technical consultant on operating problems. Assist other engineers in the solution of problems outside their specialty. SELECTION
CRITERIA: Education: BS Engineering. Experience: Position requires ten (10)
years experience in construction or associated engineering fields. A well
rounded knowledge of project management, cost control and cost estimating,
and should be well informed on Standard Safety practices. Click
Here to Apply Mechanical Engineer E03-70006134 POSITION DESCRIPTION: Successful candidate will be expected to: Experience with design + construction of Oil & Gas Facilities and related Projects. Plan, schedule and provide work direction as required for preparation designs, possess, reports, correspondence and related data and assurance the efficiency, adequacy and conformance of overall objectives of all phases of very complex engineering problems. Formulate the dosing basis by collecting, analyzing information and date relative to operating requirements, process economic considerations and such other pertinent factors as may be involved as a preliminary step in support of proposals for new construction modification or maintenance to equipment. Design or study mechanical modification to gas processing, gas handing and utility facilities. Occasionally called upon to design mechanical aspects of new faculties of the type mentioned . Participate in construction activities, pre-commissioning, commissioning and function test activities for the new projects. Design or study mechanical modification. Follow and inspect the construction progress of assigned projects assuring conformance with design specifications, codes and standard, recommend or confirm design changes material and equipment substitutes. Review design packages and capital projects. Interface with the project Management Teams (PMT) Consulting Services & Inspection Departments, capital project contractors, equipment manufacturers and Saudi Aramco proponents. Perform a variety of related work such as initiating reports, correspondence and faxes relative to assigned projects, assembling performance date and conduction studies relative to the development procumbent or adaptation of equipment, interpreting the mining and application of codes and standards, reviewing operating procedures and safety instruction, acting and safety instructions, acting as technical consultant on operating problems. Assist other engineers in the solution of problems outside their specialty. SELECTION
CRITERIA: Education: Graduate Engineer. Experience: Position requires ten
(10) years experience in construction or associated engineering fields.
Language Requirements: A Knowledge of the Arabic language desirable but not
required. Other: (1) A well rounded knowledge of project management, cost
control and cost estimating , (2) Must be completely familiar with Aramco
building, Utility and piping codes, (3) Must be familiar with Aramco
Budgeting and Accounting procedures,(4) should be well informed on Standard
Safety practices. Click
Here to Apply Mechanical Engineer L03-70004503 MINIMUM REQUIREMENTS: EDUCATION: B.S. Engineering. EXPERIENCE: Nine (9) years, preferably in the oil industry or similar process industry, such that the incumbent is clearly recognized as an expert. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. and Aramco's Codes, Standards and Specifications. Candidate must have a strong background in mechanical engineering design with emphasis on project management and contract administration. Candidate must have experience in design of mechanical systems such as HVAC, plumbing, fire protection and petrochemical piping. Candidate must be fluent in spoken and written English. Candidate must have basic knowledge in other design disciplines. Duties
and responsibilities will include: Manages projects in design stage with GES
contractors. Reviews design packages, resolve issues with Saudi Aramco
organizations and GES contractors. Performs miscellaneous related duties as
assigned. Click
Here to Apply Mechanical Engineer L30-70001979 MINIMUM
REQUIREMENTS: Education: BS Mechanical Engineering. Experience: A seven (7)
year work experience in the area of rotating and static mechanical
equipments. Fully conversant in the English language with good demeanor that
can apply in a multi-cultural working environment. Preference to working in
gas plants or in a plant environment dealing with mechanical
equipments. DUTIES/RESPONSIBILITIES:
A Mechanical engineer role that will be working on design & installation
of Gas treatment plants (LP DGA), Natural Gas Liquid (NGL) plant and Gas
compression areas. The work will involve the following: Review design
specifications produced by the design contractor for rotating equipments.
Review new design parameters (spec sheets) for modifications required to
accommodate Manifa Gas and condensate streams. Participate in engineering
design reviews for all mechanical scope of the project. Insure that Saudi
Aramco standards and specifications are adhered to prior to issuance of
design packages. Plan mechanical work pre-commissioning sequence and
durations. Insure that mechanical equipment procured for the gas processing
expansion meets project requirements. Coordinate with appropriate Saudi
Aramco organizations, i.e. Facilities Planning, Consulting Services and
Inspection departments. Click
Here to Apply Mechanical Engineer MINIMUM REQUIREMENTS: Education: B.S. Mechanical Engineering or Chemical Engineering. Experience: Minimum of nine years, preferably in the oil industry or similar process industry, such that the incumbent is clearly recognized as an expert. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. and Saudi Aramco's Codes, Standards and Specifications. Excellent communication skills. DUTIES/RESPONSIBILITIES:
Execute capital projects according to the scope, schedule and budget for
Upgrade NA Flares System Unit / NAOO & BGP Projects Division, NAPD. Full
responsibility for project development, from preliminary engineering, detail
designs to construction and final a full and safe turnover to proponent. Has
working knowledge of Saudi Aramco Engineering Standards and Specifications to
review and provides consultation, technical support related to their
interpretation/application of the standards in incumbent's area of expertise.
Manage General Engineering Services (GES) design contractor activities of
developing project proposal that include defining project work scope and
schedule requirement, and development of detailed estimate leading to the ER
appropriation and approval. Develop and prepare the contracting plan and
strategy for solicitation, evaluation and award contractor for detail
engineering, procurement and construction. Manage contractor for preparation
of detailed design drawings, material specifications and procurement, and/or
construction bid package. Coordinate activities and resolve issues among
proponent, contractors and other parties to allow construction activities
progress leading final mechanical completion. Responsible to secure
Mechanical Completion Certificate (MCC) and Performance Acceptance
Certificate for the project. Click
Here to Apply Mechanical Engineer
- Offshore L06-70007513 POSITION DESCRIPTION: Emphasis on coordinating all Project Management activities related to engineering, procurement and installation of offshore facilities including platforms, submarine cables, pipeline and other structural facilities. Familiar with Industry Codes and Standards for Offshore Engineering and Design Practices. Interfaces with the Proponent Representatives, Saudi Aramco support organizations, and Contractors as required including attending FAT at vendor locations. Performs a variety of assignments such as initiating reports, correspondence related to assigned project, assembling data and conducting studies related to project development. SELECTION
CRITERIA: Mechanical Project Engineer with understanding of project
management requirements including development of material and equipment
specifications, engineering and construction of new oil production facilities
required to execute the work along with the associated processes. Exposure to
offshore engineering concepts and strategies. Demonstrated skill in interpersonal
relationship with project team and other stakeholders through direct
interface. COMMENTS:
Northern Area Projects Department is involved with various construction
projects such as Refineries, Gas Projects, Terminals, Offshore and Marine
facilities. The Department is located in West Admin. Building in Ras Tanura,
Saudi Arabia. EDUCATION:
B.S. in Engineering. EXPERIENCE: Nine (9) years, preferably in the oil
industry or similar process industry, such that the incumbent is clearly
recognized as an expert in incumbent's field. LANGUAGE REQUIREMENTS: No
second language is required. OTHER: Must have a thorough knowledge of
engineering practices and economic principles, calculation methods, design
details, U.S. and Aramco's Codes, Standards and Specifications. Click
Here to Apply Mechanical Project
Engineer L30-70001858A MINIMUM
REQUIREMENTS: Education: BS Mechanical Engineering. Experience: Ten (10) years
of professional experience, preferably in the oil or similar process
industry. Must have a thorough knowledge of engineering practices and
economic principles, calculation methods, design details, US and Aramco
Codes, Standards and Specifications. DUTIES/RESPONSIBILITIES:
Plan, schedule and provide work direction as required for preparation
designs, processes, reports, correspondence and related data and assurance
the efficiency, adequacy and conformance to overall objectives of all phases
of very complex engineering problems. Formulate the design basis by
collecting, analyzing information and data relative to operating
requirements, process, economic considerations and such other pertinent
factors as may be involved as a preliminary step in support of proposals for
new construction modifications or maintenance to equipment. Experience with
Rotating Equipment (Compressors & Pumps). Design or study mechanical
modifications to gas processing, gas handling and utility facilities.
Occasionally called upon to design mechanical aspects or new facilities of
the type mentioned. Participate in construction activities,
pre-commissioning, commissioning and function test activities for the new
projects. Follow and inspect the construction progress of assigned projects
assuring conformance with design specifications, codes and standards;
recommend or confirm design changes, material and equipment substitutes.
Review design packages and capital projects. Interface with the Project
Management Teams (PMT) Consulting Services & Inspection Departments,
capital project contractors, equipment manufactures and Saudi Aramco
proponents. Perform a variety of related work such as initiating reports,
correspondence and faxes relative to assigned projects, assembling performance
data and conducting studies relative to the development, procurement or
adaptation of equipment; interpreting the meaning and application of codes
and standards, reviewing operating procedures and safety instructions; acting
as technical consultant on operating problems. Click
Here to Apply Civil
Engineer (E03-70012911) Saudi: Base $90/120K
+overseas package, tax protected, savings & super retirement programs.
Family status, career jobs. Responsibilities include: Writing functional and detailed design
specifications. Prepare conceptual design packages and engineering budgetary
cost estimates. Responsibilities include providing technical services to
Maintenance and Operations with regards to long term maintenance on concrete.
Serve in a technical role on structural and civil engineering. Review design
drawing and engineering specifications to produce review comments and perform
quality assurance assessments. Communicate with vendors and technical
consultants to resolve complex issues concerning new technology revision to
standards and purchase specifications, test procedure and new project design.
Provide mentoring and transfer knowledge, skills and experience to entry
level engineers and designers. Develop continuous improvements solutions and
formulates the design basis by collecting, analyzing information and data
relative to long term economic considerations and such other pertinent
factors as may be involved as preliminary step in support of proposals for
new construction, modifications or maintenance to facilities. Assists other
engineers in the solutions of problems outside their specialty (application).
Outlines the supporting service requirements such as drafting, surveying,
materials take-off, requisitioning and clerical services, checks and
coordinates the progress of such work, and reviews it for accuracy upon
completion. Acts as the project design engineer on assigned projects. Follows
and inspects the construction progress of assigned projects assuring
conformance with design specification, codes and standard, Recommends or
confirms design change, material and equipment substitutes, and assures that
costs do not exceed appropriate funds by anticipating overruns and justifying
supplementary appropriation. Performs a variety of related work such as
initiating reports. Correspondence and cables relative to assigned projects,
assembling performance data and conducting studies relative to the development
, procurement or adaptation of equipment, interpreting the meaning and
application of codes and standards , reviewing operating procedures and
safety instructions, acting as technical consultant on operating problem.
Civil
Engineer L32-70002802 Saudi: Base $90/120K
+overseas package, tax protected, savings & super retirement programs.
Family status, career jobs. Education: B.S. Engineering. Experience: Nine (9) years in the
oil industry or similar process industry. Experience must be such that the
incumbent is clearly recognized as being capable of project and design
assignments . A thorough knowledge of English is required to perform analyses
and studies in depth, make professional presentations and keep up with
technical advancements; Arabic not required but considered desirable for
American incumbents in this position. Must have a thorough knowledge of
engineering practices and economic principles, calculation methods, design
details, US and Aramco Codes, Standards and Specifications. Electrical Engineer L30-70001854 Position Description Successful candidate will be expected to:
Experience with design, construction, project controls and safety for Oil
& Gas Facilities and related Projects. Plan, schedule and provide work
direction as required for preparation designs, possess reports,
correspondence and related data and assurance the efficiency, adequacy and
conformance of overall objectives of all phases of very complex engineering
problems. Formulate the dosing basis by collecting, analyzing information and
date relative to operating requirements, process economic considerations and
such other pertinent factors as may be involved as a preliminary step in
support of proposals for new construction modification or maintenance to
equipment. Dosing or study modification to gas processing, gas handing and
utility facilities , Occasionally called upon to design related aspects of
new faculties of the type mentioned . Participate in construction activities,
pre-commissioning, commissioning and function test activities for the new
projects. Follow and inspect the construction progress of assigned projects
assuring conformance with design specifications, codes and standard,
recommend or confirm design changes material and equipment substitutes.
Review design packages and capital projects. Interface with the Project
Management Teams (PMT) Consulting Services & Inspection Departments,
capital project contractors, equipment manufacturers and Saudi Aramco proponents.
Perform a variety of related work such as initiating reports, correspondence
and faxes relative to assigned projects, assembling performance date and
conduction studies relative to the development procumbent or adaptation of
equipment , interpreting the mining and application of codes and standards,
reviewing operating procedures and safety instruction, acting and safety
instructions, acting as technical consultant on operating problems. Assist
other engineers in the solution of problems outside their specialty.
POSITION DESCRIPTION: The Cost Engineer will be working under
Northern Area Projects Department / Ras Tanura Projects Division. Successful
candidate will be expected to: Be responsible for the preparation, review,
monitoring, analysis and reporting of all cost data for projects associated
with Capital Expenditure Program, as well as the Division's Net Direct Expenditures
(NDE), annual Operating Plan and five years Business Plan. Assist Division
Business Administrator and Project Manager in all cost related matters.
Direct Supplemental manpower (SMP) Cost Engineers/Analysts in the preparation
review, monitoring & reporting on the following: Monthly project reports
including Projects Planning Updates (PPU) and Monthly Project Updates (MPU)
particularly cost commitments, expenditures and forecasts. Monthly NDE cost
sheet reports analysis and verification. Quarterly Variance Analysis,
Accountability Reports, Annual Operating Plan and Five Years Business Plan.
Monthly Information System (MIS) and Balance Score Card (BSC) reporting.
Opening and financial closing of WBS accounts for capital projects. Review
and analyze claims and change orders on project contracts. Assist in
preparation of cost portion of Engineering, Procurement and Construction
Contracts. Please reference the job Number or
send a copy of the job description when applying and highlight how your
experience qualifies you for the position. Click Here to Apply Presented by: INTERNATIONAL STAFFING
CONSULTANTS, INC. Global Staffing Since 1979 31655 - 2nd Avenue, Laguna Beach, CA 92651 USA View all of our openings at www.iscworld.com |